Heat Transfer analysis radiation convection conduction
Simulation Models dynamics control Chemical mechanical
Many of the problems I've solved involved heat transfer for various clients in different business sectors.
Some examples are listed below (click through to find out more)
Even if your area or concern isn't shown I've done lots more so if it's heat transfer and specially if it's a dynamic or distributed system please feel free to contact me.
Dynamics of distributed parameter systems (PhD thesis); parabolic PDEs, integral transforms, control theory
Glass making forehearth, moving stream, radiation, convection, Navier Stokes equation
Initiation of explosives by heated bridge-wires, dynamic, electrical current pulses, conduction into pyrotechnic materials
RF Soldering, induced current circulation heating, internal transfer, cylindrical coordinate system.
Making glass to metal seals in a lehr (furnace), dynamic, radiation, conduction, differences between tool geometry
Vacuum web coating, dynamic, evaporation, condensation, radiation, total heat balance, electrical power input
Polymer batch process, dynamic, exothermic chemical reaction, mechanical shear forces power input, water jacket cooling
Boundary layer heat transfer measurement: dynamic model of small exchanger, looking at Reynold's analogy.
As a result of this experience and years of doing simulations and models of such processes, I have created a freely available simulation tool, (also supported and used for clients,) which includes special features to make dynamic systems modelling involving radiation and conductive and convective heat transfer specially easy.
|Links in website:
|Invitation. McCann can help if you have a
design or operational problem that needs some technical support that is outside your
team's experience, some quantitative assessment of what is really the cause of the
difficulties, some design alternatives or just a fresh look by an intelligent
If you have a problem with the behaviour of a market sector, plant, process or item of equipment and would like to get a quantitative handle on it to improve yield or optimise performance, then contact me. I'm always ready to give a little time to discuss a new puzzle, in confidence, of course. We'll only worry about fees when there is some defined work. I can be flexible about how I work with you.
Chadds Ford PA
T: 1 302 654-2953
M: 1 302 377-1508 (Cell)
|Request. Please let me know how you found this website and your interests by following this feedback link. Thank you||Date: 2014.08.22